Tenere 700: Airbox Wrapped with Thermo-Tec Reflective Heat Barrier + Battery Box Wrapped with Reflective Heat Tape + ZinHan Black Aluminized/Fiberglass Heat Shield Adhesive Backed Mat applied to inside of skidplate
Airbox Wrapped with Thermo-Tec Reflective Heat Barrier Wrapping the airbox with heat reflective insulation/tape can reduce intake air temps resulting in a more dense air/fuel ratio improving performance slightly (the motor & catalytic converter located directly below generate a lot of heat). Airbox Removal Note: this was not a stand alone job...the tank was off to facilitate replacement of the 7 rubber brake lines with a HEL Performance Braided brake line kit & repair a broken left cylinder spark plug connector locking tab. Removal of the oem airbox is realatively easy once the tank (requires removal of front side panels), seats & side panels under the rider seat are removed (see step by step instructions via this link ). remove the airbox breather hose at the front top loosen the 2 airbox/throttle body intake boot 4 mm allen head bolts ( Tech Tip: do not completely undo to prevent the nut & spacer from falling off & getting lost in t...