Tenere 700: Camel 1 Finger Clutch Kit - Camel Heavy-Duty Side Stand Return Spring

Camel 1 Finger Clutch Kit

A very nicely sorted out kit that dramatically reduces clutch lever effort by approximately 18%, 30% or 37% & increases the clutch friction point by up to 60% depending on which of the 3 cable attachment holes is used. The install video, see below, is detailed & includes correct lever free play adjustment & tips on the impact of the wider friction point for each of the 3 cable attachment holes. I opted for the recommended middle hole which provides a marked reduction in lever pull effort, widened friction point & dramatically improved clutch modulation.  Wow...one of those small changes that equates to very appreciated & desirable results...so much smoother on shifts & easier to modulate...well done Cory 👍

Camel 1 Finger Clutch Kit Installation Video (V2)

Camel Heavy-Duty Side Stand Return Spring

The Camel return spring is massively stronger (+95%) & larger than the oem spring that eliminates concerns over the side stand bouncing down in rough terrain & inadvertently activating the side stand safety switch that kills the motor + will make the bike less susceptible to rolling off the stand when deployed 😀  It returns to the upright parked position with such positive action & a resounding thud that I added a rubber pad to the stop.